Servicing Los Angeles, Orange, Riverside, San Bernardino, and Ventura Counties | 800-773-7663

Category : Roofing Tips

What Are The Benefits of Reflective Roof Coating?

Reflective Roof Coating

Your building is likely to be the largest investment you make in your life. You need to make sure you protect your investment which includes regular maintenance and keeping the roof in optimal condition. Poor roofing can lead to serious building damage inside and out, which lowers the value, costs you money and ruins your investment. A well-kept building is also the best way to catch someone’s eye should you need to sell in the future.

Benefits of Reflective Roof Coating

The weather in the Los Angeles area can vary throughout the year, but for the most part, we see sunny days. The sun can be your biggest enemy and can take years off the life of your roof. The best way to protect a roof in warm and sunny climates is by installing reflective roof coatings. Even if you have not yet seen any wear and tear, reflective coating is a great way to preserve the life of your roof and saves on future repairs. These coatings create a seamless white membrane which prevents leaks, keeps your roof cooler, and protects from the elements.

The coating can repair any minor damage that your roof currently has and provide future protection. By reflecting the light away your roof will last longer. Keeping the heat away as well as the light also keeps your building cooler, and this means lower utility bills. There are a number of reasons to look into getting reflective roof coatings.

  • A great alternative: Coatings are a good alternative to full replacement which can be expensive. A few leaks or cracks do not mean you necessarily need to replace your roof. A simple coating can take care of this. Have a professional come and inspect your roof to determine if a coating can help you. It will save you money to have minor repairs done and a coating added versus installing a whole new roof.
  • Extended life: By adding a roof coating, the lifespan of your roof will increase by 5-7 years. Your roof will stay leak free and be protected from the harsh sun and other elements for longer, which gives you time to save up for when replacement will eventually be necessary.
  • Saves money: Roof coating costs half the amount of re-roofing. Because the installation of a roof coating is not as invasive or time consuming as roof replacement, you will not lose any business time. By not having to tear the roof off, there is not as much disruption, and less labor required.
  • Lower utility bills: Most roofing materials are dark in color, and in the sun this absorbs heat, making your building hotter. You spend more on air conditioning than you would like. A reflective roof coating will keep the light and heat away, keeping your building naturally cooler and your bills much lower.
  • Tax credit: Coating of your roof can earn you a federal tax credit, where a full re-roofing may not. You could qualify for a 10% credit on the cost of your roof, not including labor costs.

The Reflective Coating Process

Roof coating takes less time than re-roofing. The time required depends on the building size but it typically can take less than a day. Larger buildings may require a few days for completion. Your roof is cleared of all debris first and then the coating is applied. It has to be left to dry for 24 hours but during the time the building can be used, so there is no loss of business time or if a residential home, you can still come and go as you please.

Conclusion

Reflective coatings are the environmentally friendly and economical choice for today. It is a relatively small investment that will deliver big returns. You save on energy bills and reduce the overall maintenance costs that your roof will need. By extending the life of your roof, you get more overall in terms of the investment you made on the whole building. Contact us today for an inspection and we can get started on coating your roof today.

Do You Need A Commercial Roofer?

free estimate button

Eco-Friendly Commercial Roofing Ideas

Eco-Friendly-Roofing-Ideas

With much of the world going ‘green’, the roofing industry has been taking steps to provide eco-friendly roofing too. The roof of a building adds to the value, so the more sustainable it is, the better off owners will be. You can now choose from several different styles and materials that are durable, long-lasting and environmentally friendly.

Eco-Friendly Roofing

  • Cool Roofing: A cool roof is one that is white or another light color and it helps to reflect the sun’s heat away rather than absorb it. What this means for you is that you will not need as much air conditioning to get a comfortable inside temperature. If you live in a hot and sunny climate, cool roofing is the way to go to help you save on energy costs. To get the most out of a cool roof, you want to use light colors.
  • Metal Roofing: These make a very economical investment and since they are made from recycled materials, metal roofing is definitely a ‘green’ way to go. Standing seam metal roofing delivers the best longevity at one of the lowest prices and compared to asphalt roofing, metal roofing can last 50 years, which is a good 30 years longer. Metal roofing comes in several colors and designs so you can get a style that best suits your need and building. If you choose a light color, you also get the added benefit of reflective power.
  • Wood Shingles: Wood is popular because of the classic look it gives and because it is biodegradable and eco-friendly. Wood today comes from sustainable forests since the old-growth cedar wood that was once used is becoming scarce. Sometimes you can find wood roofing systems made from claimed materials that once were bridges, water tanks, and mills. Despite their beauty, wood shingles are not fire resistant so you want to use a protectant or coating to protect your roof.
  • Clay and Slate Tiles: Tiles have been used in roofing for centuries because of their durability and because they can last for up to 100 years. Clay tiles are made from natural materials so are eco-friendly in many ways; rot-resistant, fire-resistant, insect-resistant and virtually maintenance free. The drawbacks include being very heavy and very costly. You may need additional support for your roof to handle the weight. When it comes to pricing, your initial output may be high, but the longevity of clay and slate tiles more than makes up for this cost in the long run.

Learn More About Our Roofing Services!

free estimate button

Why Use Membranes Over Tar and Gravel on Your Commercial Roof?

Why use membranes over tar and gravel

When it comes to commercial roofing, tar and gravel system shave been the industry norm for quite some time. They gained popularity after crude oil found a place in the economy and have worked out pretty well for commercial roofing. They are cheap and pretty effective and until recently dominated the industry when it comes to flat roofing systems. Recently, scientific discoveries have found new systems for flat roofing that may prove to be even better than these single ply roofing systems.

Why Use Membranes Over Tar and Gravel

  • Membranes are much lighter. Compared to an EPDM (rubber) roof that has insulation and fasteners with it, plastic membranes are more lightweight. Rubber systems can weigh close to 2 pounds when all is said and done, but modified bitumen or plastic membranes are more efficient thanks to being lighter.
  • Tar and gravel systems involve a hot kettle to melt large chunks of solid tar so there are an inherent danger and high insurance liability. The fumes produced are also very noxious and fatal roofing accidents have occurred in the past with exploding kettles and scorching spills. Because of the risks and dangers, many commercial roofing companies prefer to use membranes instead of tar and gravel and smaller companies are following suit because they cannot cover the insurance policies required to cover the risks.
  • All membrane roof products are available in a white color option. This means the suns light and heat is reflected away, keeping the building interior cooler. When you re-roof with a single ply system it is very easy to first lay down a thick layer of foam board insulation, which helps this system maintain great energy efficiency.
  • When tar begins to age, it shrinks and cracks and because it is essential to the waterproofing aspect of the roof, leaks can occur more frequently. This would be an easy fix except that the gravel often covers the cracks and they are ignored. Additionally, water can run a long way from where it starts so when you notice it, you may have no way of identifying where it started.
  • A built-up roof (tar and gravel) can typically last between 20 and 30 years, depending on how much was spent on it. Membrane roofing systems can last a solid 20 years or longer if not damaged.

The types of membrane roofing systems we install include PVC and TPO. Either of these are great replacements for tar and gravel and will ultimately benefit your commercial building in no time. Contact us today for a consultation and we will help you find the right single ply membrane roof for you.

Do You Need Commercial Roofing Services?

free estimate button

Main Benefits Of Installing A Flat Roof

Adco Main Benefits Of Installing Flat Roof

All about the flat roof design

Owning a home by building or purchasing one is probably among the most important decisions that you’ll make in life since that’s a significant project that carries with it a huge monetary value. Not only will it be important because of the financial value involved, but also because a house is at times a lifetime investment that needs to be taken seriously. Generally speaking, you’ll have to consider a majority of your house’s components, if you’re to end up with the house you’ve been dreaming of.

Talking of the parts of that house, one of the major parts to consider will be the roof, which has several factors to consider like roofing styles and techniques. Basically, you’ll have to choose between the flat and the pitched rooftop designs. This article will focus more on the flat roof design, since it’s becoming more popular, not only for office or industrial roofs but also residential roofs.  This means that flat roofing obviously has some benefits that make it the style to choose.

Benefits of using a flat roof

Ease of access

Whenever you need to get to the top of a flat roof, all you may need is a ladder or steps, which in most cases are fixed to the building, so you won’t have to carry climbing equipment around. You don’t require any professional skills to climb and walk on the roof as might be required with alternative designs. This makes it easier to conduct a routine inspection on the roof and helps to maintain better condition of the roof. As the building owner, you could climb to the roof once in a while, conduct an inspection, and identify problems before they even progress. This way, you can call in professionals to get your roof repaired before the damage gets out of hand and more expensive.

It increases usable outdoor space

Do you need to set up some solar panels to save electricity, find a place to relax, or do some gardening? You could do all of this and more, on your flat roof. You can move these items to your roof instead of overcrowding and complicating your backyard. You could even install a green roof comfortably, which can be an excellent way to insulate your home and increase its value.

Increased interior space

If you need more space in your house, you should definitely consider a flat roof, because it has no slopes that “eat up” the interior space. This design would be the best for buildings where the maximum amount of interior space is needed.

Flat roofs are less costly

One thing you will love about flat roofs is that they cost less to install and maintain over their lifespan compared to other styles. Things like labor will even be cheaper since there is less risk involved in installing a flat roof. These roofs are faster and easier to install, resulting in less labor risk and costs. Other than that, these roofs have fewer complications in terms of damage, meaning that the maintenance costs will be lower over time.

Final thoughts

You can conclude that flat roofs are highly convenient when it comes to adding that protective cover to your home. The only challenging task you might have is choosing the best professionals for that job and this is easily solved by conducting some research first.

Learn More About Our Roofing Services!

free estimate button

Top 3 Differences Between Residential And Commercial Roofing

Top 3 Differences Between Residential And Commercial Roofing

Homeowners or business owners do not always give much thought to roofing until there is a problem.  To the average person, there may seem to be little difference between a residential roof and a commercial roof. There are, however, some critical differences between these. That is why you need a trained, knowledgeable roofing contractor who knows and understands the differences.

When you have or suspect you have a leaking roof, it’s imperative that you choose the right roofing company. You certainly want to get the proper materials and design for your home in your area, in terms of climate, exposure, purpose, and style. For those reasons, you want the services of a company that understands the differences between commercial and residential roofing.

The Purpose of Roofs

Primarily, of course, the purpose of a roof is to protect our homes and commercial structures from rain and other natural elements. In addition to protection from inclement weather, residential roofs are visible and homeowners today have many decorative choices. Having an attractive roof can help a home appear more desirable to you and to others, and when a homeowner decides to sell, it can increase the value significantly.

Commercial roofs are normally above the line of sight, so appearance is less important. Most commercial roofing is designed for function. It is business like and little or no consideration is given to decorative colors or patterns. Nevertheless, there are many options available for commercial roofing as well, and your professional roofing company can help you understand the differences, according to your specific needs.

Design Options

Since most commercial roofs cover larger areas, they have to be strong enough to carry the weight of ancillary equipment that has to be considered in most commercial installations. These roofs may have the weight of heating and cooling systems, large signs and other installed equipment or pipes. Another consideration is that most commercial roofs are flat in design and being flat, requires more maintenance, as water is more likely to pool.

Necessary Skill

Residential roofs are normally sloped. They allow rain and snow to slide easily downward. This type of construction also makes a residential roofing relatively easy to install. Aside from the chimney, few obstacles obstruct the workers’ path during installation and many residential roofs are installed within a day.

A commercial roof frequently presents more obstructions. There can be external piping, smokestacks, cooling and heating installations, communication equipment and other obstacles depending on the type of business being conducted at a given site.

To ensure the right materials and installation abilities, it is necessary to find the right roofing company. Every pipe is a place for a leak to potentially start. The right roofers make sure that these installations are properly taken into consideration to ensure that the entire roof will remain intact and leak free for years to come.

When you need a new roof for your commercial or industrial building, you should call Adco Roofing and Waterproofing. You’ll see that you’ve made the right choice in choosing a roofing contractor with the experience, the reputation and the ability to handle the most complex installations or repair.

Learn More About Our Roofing Services!

free estimate button

The Importance of a Proper Drainage System

Proper Drainage For Your Flat Roof

Your roof exists to protect the space below it from water and other elements. Keeping water from soaking into building materials is crucial to maintaining the integrity of the structural components that make up the framework of any building, commercial or residential.

Making sure that buildings remain dry also avoids the dangers that can result when interiors become wet. Chief among this potential damage is mold growth and damage; a risk that increases when the mold spores found both inside and out are exposed to moisture. Microbial growth damages standard building materials and can also threaten the health and well being of individuals inside.

Ensuring Drainage With A Flat Roof

The key to keeping buildings dry under a flat roof is to be sure that rainwater and other precipitation drains freely and completely off the roof. Since flat roofs do not have the pitched sections of a traditional roof, it is harder to guide the water off the roof.

Despite the relative difficulty of guiding water from a flat roof, a well-engineered one is able to drain the water efficiently. Even though a flat roof does not appear to have a slope to it, a properly constructed flat roof surface will have a slight angle built in to direct the water pooling on it towards the drain and gutter system.

The Importance of a Proper Drainage System

Clearing out clogs in the gutters and downspouts on a flat roof is critical for proper drainage. If the built-in drains fill with debris, they dam up the water, resulting in the rainwater, slush, or snowmelt rising ever higher on the surface of the roof. Eventually, the moisture finds a way to seep into the building structure through a seam, damaging the areas where the water then migrates.

A flat roof will also have internal drains if it covers a large area. These drains carry water away from the center of the roof and ultimately send the water into the gutter and downspout system through conduits. These internal drains also must be maintained consistently to work well, meaning any residue and debris must be removed to allow the water to flow.

Often a flat roof has one or more fixtures called scuppers that direct the flow of water from the roof through a parapet or low wall encircling the flat roof. Frequently seen where the flat roof is also used as a terrace or deck, the scupper is essentially a culvert or small tunnel which collects and then moves water off the roof and into a drainage system. Scuppers must be clear of leaves, loose gravel, or any other substances that may prevent water from moving. They also can corrode or form cracks over the years, so will require repairs or sealing to prevent water from moving into the interior of the building rather than through the scupper and into a drain.

Maintain and repair the drainage system associated with your flat roof to avoid water damage. Seek professional help if a general cleaning does not resolve the problem.

Learn More About Our Roofing Services!

free estimate button

Commercial Roofing Systems You Need To Know

Types of Commercial Roofing Systems

The only way to get value for your investment and keep your property safe is to find and use the best roofing materials.  There are several things you should know when selecting a roof or changing your current one. Although many will focus on price, there are other features such as the lifespan of the roof, the climate in your area, and maintenance requirements. You can select from the many types offered on the market and get one that best suits your roofing needs.

Commercial roofing systems

It is imperative to know the available roofing systems types when planning to design a new building. The same applies when you have plans to change the roof of your building. You need to familiarize yourself with the three components of each one of them, beginning with the low slope commercial roofing systems.

  • Watertight layers: This is an essential element. It helps to block water from entering the roofing system that could damage and cause it to rot quickly.
  • Surfacing: These components assist in defending and strengthening the watertight seal. It shields the roof materials from sunlight and weather. It also enhances fire resistance and possesses solar reflective properties.
  • Reinforcement: These are components that enhance stability, strength, as well as puncture resistance to the membrane. They are also long-lasting.

Thermoplastic systems

The popularity of Thermoplastic roofing systems is growing fast due largely to their durability. Thermoplastic systems are made from durable materials and have several beneficial properties. These include resistance to ultraviolet lights, ozone, and chemical exposure. Thermoplastic roofing systems are designed to last more than 20 years as they can withstand high temperatures and exposure to harsh elements. The most common thermoplastic systems are PVC and TPO.

Green roofs

Although thermoplastic systems are growing fast in popularity, green roof has had the highest popularity surge. It is likely that the significant increase is due to the benefits it offers, including:

  • Conserves energy
  • Lowers the urban heat island effect
  • Increases the longevity of roof membranes
  • Reduces noise and air pollution

Due to the continuous upsurge in electricity bills, renewable energy is becoming more preferred and  widespread in recent years. Most home owners are using these developments to make sure they have excellent roofing structures such as Photovoltaic Solar Panels. The PV solar boards are utilized to save energy while saving you money. Its key roles are to convert light into energy so that it can light up the house.

Modified bitumen systems

The roofing industry faced further remarkable improvements that transformed asphalt. The advances resulted in the development of SBS (Styrene-butadiene-styrene) and APP (Atactic polypropylene). These are referred to as modifiers. Due to their inclusion, it became easy for builders to benefit from the improvement in the old asphalt roofing structures. This meant installation of industrial roofing with higher performance membranes. There continue to be changes in this sector resulting in further innovative methods that use this technology.

Built-Up (BUR) system

BUR system acquires its name from base sheet built constructions. The roofing systems are constructed from the ground up onsite and include smooth asphalt built-up, either hot or cold, and ballasted asphalt built-up. All types are generally comprised of three parts: bitumen material, ply sheets, and one or more surfacing materials. The type of surface coating used can be instrumental in cost and durability.

EPDM roofing system

This is among the most straightforward roofing systems. EPDM structures are considered superior in terms of permanency, versatility and are known to have a lengthier lifespan when compared to others.

Whether you want to have SBS and APP modifiers, Green Roofs, BUR, Thermoplastic or EPDM roofing, they are all good for commercial roofs. Before you decide, make sure you know the difference between the roofing systems, as this can help you to identify the key benefits as well as any drawbacks that you may encounter after installing them.

The type of the roofing system you choose can contribute a lot and make a great difference in terms of expenditure and first investments. Not only that, but it will create a difference in the cost of your maintenance and repairs. As a building owner, you should consider the cost savings over the years and select a roofing system that works to decrease effects such as urban heat island effect. Protect your investment and the people you love with the best roofing material.

Learn More About Our Roofing Services!

free estimate button

Why Is My Flat Roof Leaking?

why-is-my-flat-roof-leaking

It is possible to have residential buildings with flat roofs although flat roofs are mainly used in commercial and industrial buildings. Most people are familiar with pitched roofs as they are typically used in residential buildings. It is important to understand that, although pitched and flat roofs serve the same function, they are different in designs. If your flat roof is leaking, you may have a different problem than if your pitched roof is leaking. There are a few key reasons why your flat roof might be leaking that you should be aware of:

Chimney and exhaust pipe sealant

Since flat roofs are installed mostly in commercial and industrial buildings, these buildings have chimneys to release the gases produced by the heating system. In addition, these buildings have exhaust pipes that allow gases produced by the plumbing system to escape. Chimneys and exhausts require a pipe sealant to ensure they are leak proof but this  can become a weak point. If the sealant is not inspected, maintained and replaced regularly, your roof might start to leak. However, there are modular systems available to seal chimney and exhaust pipes. One of these modular systems is the boot which seals the chimney and/or exhaust pipes for 20 to 30 years. The boot is used alongside a tar sealant which needs to be replaced each year. Its exposure to weather conditions and its age will determine how soon it needs to be replaced.

Maintenance and repair of older roofs

Flat roofs can last long if they are properly maintained over the years. Although they do not require regular maintenance like pitched roofing, flat roofs should not be left unattended for years.  This can allow a problem to develop which means you may end up facing costly repairs. In most cases, flat roofs have gravel added on top of the membrane to provide additional protection. The gravel should be spread out at least once a year because it will become uneven after exposure to strong winds, heavy rainfall, snow, and ice. The gravel should protect the membrane and redistribute it regularly will ensure that your roof lasts longer.

Physical damage

It is possible to have physical roof damage especially due to large hailstorms, wind or if a tree or branches fall on your roof. When this happens, your roof may develop drainage problems depending on the intensity of the damage. You need to hire a professional to assess the degree of damage and determine what needs to be done to repair the roof. You may have to repair the roof but in the event of serious physical damage, replacing the entire roof could be the better option. Physical damage no matter how small can cause leaks, damage to gutters and drains as well as scuppers.

The age of your roofing system may also predispose it a too early deterioration. Most felt roofing systems start to deteriorate after 15 to 20 years, although this varies depending on the materials used, the design and how often the roof was maintained. If the commercial roof of your building is showing signs of leaking or moisture, don’t hesitate to contact a commercial roofing contractor to identify and fix the problem as soon as possible to avoid further damage and costs.

Learn More About Our Roofing Services!

free estimate button

3 Tips to Prevent Overspray When Spray Painting

spray paint

Spray paint is an economical and easy way to upgrade your home décor, but only if you use it right. Let’s be honest, using a spray paint can be messy. Even the most experienced spray painter can have overspray and irregular drips from the can. However, the main problem is over spraying especially when you are using spray paint indoors, to avoid it follow these tips:

Select right sprayer accessories

There are many accessories easily available at every hardware shop which can help a lot in avoiding overspray. One of the supreme accessories accessible to lend a hand with applying coatings in those hard to reach areas is “Gun Extension”.  Available options include angled spray head nozzles, complete 360° spray patterns for use with internal pipe coatings, fixed or rigid extensions of various lengths and flexible extensions with nearly limitless accessibility. It is necessary to spray at right angle and distance to avoid possible over spraying. Also get a “Card Board Shield holder” to prevent over spraying when you are working at corners, near the ceiling or floor area or around doors and windows. Just attach the shield holder to any piece of cardboard and you are ready to go.

Determine the right pressure

The incorrect pressure size is notorious for generating fogging and overspray, but equal to that is improper spray technique. The prime mistake many “painters” make is to turn the pressure full volume thinking they’ll get the job done quicker by doing so. You might, but all the time you save will be exhausted cleaning up overspray from all the worn out paint you’ve sent into the air and onto nearby things…Your pressure control knob is under the motor – I consider turning the knob to the right will result, the increase in pressure, and to the left decreases. I would start in on with the knob turned all the way to the left (using a .015 tip), then turning up the pressure slightly until the paint is able to be finely atomized – stop there. Practically any amount of pressure greater than what it takes to atomize will outcome in overspray and/or bounce-back off the surface being painted.

Decide the right tip size

Airless paint sprayer no overspray is as well possible if you choose a right tip size compatible with the fluid viscosity and the project. This tool is available with multiple options for tip sizes and patterns from which you may pick the most suitable ones. Larger tip size is best to cover a widespread surface as it allows a greater material to release faster. On the other hand, a bigger pattern also allows the quick coverage of a broader area. On the other side, smaller tip sizes are useful for delicate areas that include small surfaces. However, tip size and pattern also depends on the nature of the project. Broad spray pattern and a larger tip are perfect for significant scale projects such as external wall painting and fence retouching. But if you will use the same size and prevent for a smaller project like painting the cabinets, there will be immense overspray and mess. You have to determine the type of the project to decide the right tip size and pattern to minimizing overspray. The first digit of a spray tip is the fan size with your gun about 6″ from the surface – double the first digit when the gun is held at 12″ from the surface.  If you are using latex, try scaling back a little on the tip size, thin your product about 5-10%, and turn your pressure down to the lowest possible setting that will still atomize the paint.

 

 

 

Learn More About Our Roofing Services!

free estimate button

The Different Types of Flat Roofs

Types Of Flat RoofsWhen it comes to designing the perfect commercial or industrial building, there are a lot of roofing options to choose from. However, one of the most popular options is flat roofing. Sure, multi-dimensional roofs may seem more avant-gard, but if you want to ensure that the structure has integrity, the best option to go with is a flat roof because of how practical they are. Not only can this be a very safe option, but it can also offer a lot of value.

Duro-Last Roofs

If you are in the market for a roofing system that you don’t have to replace often, then you should definitely consider Duro-last. The Duro-last roof has earned a reputation for being both long-lasting and durable. However, one of its most attractive features is the cost. This brand not only offers a considerable amount of value, it also happens to be extremely affordable. When it comes to maintenance, it does not require as much upkeep as other brands do. Keep in mind that you will need to inspect it from time to time, just as you would with any other brand.

Membrane Roofing

One of the most important elements of any flat roof is the membrane. There are a lot of different combinations that could hold the membrane in place like glue or nails, gravel or rubber. There may be other components added to make sure that the functionality of the membrane remains protected. Ultimately, the membrane is what shields the inside of your building from all outdoor weather conditions.

Thermoplastic Membranes

If you need a roofing system that can stand up to harsh weather condition, thermoplastic membranes may be just the thing you are looking for. Thermoplastic roofing systems also referred to as TPO, are extremely unique in that they are designed to adapt to the weather. Unlike the average roofing system, this one produces a membrane that contracts and expands when outdoor conditions are extreme. This ensures that your roof stays in great condition and does not become dried out and brittle. This well-planned environmentally friendly design makes it the perfect option for those who want to avoid physical damage from extreme weather conditions.

Rubber Membranes

If you take time to compare the differences between thermoplastic membranes and rubber roofing, you will find that the two are quite similar. Rubber roofing membranes are similar to thermoplastic membranes in that they are designed to help your building withstand harsh weather. However similar they may seem, they perform the vital functions in entirely different ways.

You see, unlike TPO that is built to adapt as weather conditions change, rubber membranes work to keep the weather off of the building altogether. Some may even say that the roof is resistant to harsh outside conditions. While both the TPO and the rubber membranes can be valuable, in most cases, it is best to consult with a roofing contractor to find out which option is best for you because everyone has different needs.

Learn More About Our Roofing Services!

free estimate button